NeoCryl AP-2650
Silicone
Avecia-NeoResins
消去泡沫/防沫剂 >> 硅树脂
Defoamer / Antifoaming agent >> Silicone
丙烯酸/丙烯酸盐树脂
Acrylic/Acrylate Resins
聚亚安酯
Polyurethane
涂层 >> 由溶剂生成
Coatings >> Solventborne
涂层 >> 水生
Coatings >> Waterborne
toluene
NeoCryl AP-2650 is a silicone modified defoamer and de-aerating agent that can be used effectively with NeoCryl or NeoRez water-based coating systems. As a starting point, it is suggested that 0.5-2.0% of AP-2650 (wet-on-wet) can be added very slowly under good agitation. After addition, stir for 15-30 minutes in order to achieve a homogeneous blend, but avoid vigorous mixing with the possibility of entraining air.
The amount of AP-2650 that is added will depend on the end use. For curtain coat applications, as much as 2% is recommended. For ease of incorporation into a water borne coating blend NeoCryl AP-2650 1:1 by weight or volume with water prior to using.
Will Not Cause Cratering or Loss of Intercoat Adhesion
Miscible With Water-borne and Solvent-borne Systems
NeoCryl AP-2650 defoamer can be used in coating for any market where ease of incorporation and efficiency is desired.
Silicone modified defoamer and de-aerating agent. Used in water-based and solvent-based coating systems. Offers ease of incorporation and efficiency. Does not cause cratering and loss of intercoat adhesion.