Baysilone Paint Additive OL 31

Polyether modified methyl polysiloxane

Borchers

流动/均化剂 >> 硅树脂 Flow / Levelling agent >> Silicone 滑动控制 >> 硅树脂 Slip control >> Silicone 底材表面处理剂, 混杂 >> 防凹陷剂 Surface conditioner, miscellaneous >> Anti-crater aid 硅树酯 Silicone 涂层 >> UV / 辐射线固化 Coatings >> UV / Radiation Curing 涂层 >> 水生 Coatings >> Waterborne Baysilone®- Paint Additive OL 31 5 Polyether-modified methyl polysiloxane, 100% active ingredient Description Additive to improve slip and levelling properties. Solubility aliphatic hydrocarbons insoluble / soluble aromatic hydrocarbons aromatic hydrocarbons soluble alcohols soluble esters soluble ketones soluble glycol ethers soluble glycol ether acetates glycol ether acetates soluble water soluble Properties Baysilone®-Paint Additive OL 31 is a very effective levelling agent and also improves slip properties. lt eliminates craters, spray structures and surface defects such as may be caused by silicone products (e.g. in polishes). Applications Baysilone®-Paint Additive OL 31 is usable both in paints which dry physically and in chemically curing paints. lt is characterised by good binder compatibility and is particularly suitable for use in silicone resins. Since solutions in water are relatively stable, its use in waterborne paints is also possible in principle. Extensive trials should nevertheless be performed beforehand. Addition rate 0.05 - 0.5% based on solids content. Recoatability Loss of adhesion between base and top coat or of recoatability is unlikely at low addition rates. Such defects, the causes of which include over-baking, may be intensified, however. Improves slip and levelling properties. Eliminates craters, spray structures and surface defects such as may be caused by silicone products. Usable both in paints which dry physically and in chemically curing paints. Characterised by good binder compatibility and is particularly suitable for use in silicone resins. Since solutions in water are relatively stable, its use in waterborne paints is also possible in principle. Extensive trials should nevertheless be performed beforehand. Loss of adhesion between base and top coat or of recoatability is unlikely at low addition rates. Such defects, the causes of which include over-baking, may be intensified, however. Recommended usage level: 0.05 - 0.5% based on solids content.