Baysilone Paint Additive OL 44
Polyether modified methyl polysiloxane
Borchers
流动/均化剂 >> 硅树脂
Flow / Levelling agent >> Silicone
滑动控制 >> 硅树脂
Slip control >> Silicone
底材表面处理剂, 混杂 >> 防凹陷剂
Surface conditioner, miscellaneous >> Anti-crater aid
丙烯酸/丙烯酸盐树脂
Acrylic/Acrylate Resins
醇酸树脂
Alkyd Resins
氨基树脂
Amino Resins
涂层 >> 水生
Coatings >> Waterborne
Baysilone®- Paint Additive OL 44 5
Polyether-modified methyl polysiloxane, 100% active ingredient
Description
Additive to improve slip and levelling properties.
Solubility
aliphatic hydrocarbons insoluble
aromatic hydrocarbons soluble
alcohols soluble
esters soluble
ketones soluble
glycol ethers soluble
glycol ether acetates soluble
water soluble
Properties
Baysilone®-Paint Additive OL 44 is an effective levelling agent. lt eliminates craters and spray structures and increases slip properties.
Applications
Baysilone®-Paint Additive OL 44 is very versatile. lt is characterised by good to very good efficiency in baking paints based on alkyd resin, alkyd / amino resin combinations and in acrylic resin and acrylic / amino resin combinations.
Baysilone®-Paint Additive OL 44 is water-soluble but, in view of the limited stability of such solutions in water-borne systems, extensive trials should always be conducted beforehand.
Addition rate
0.05 - 0.5% based on solids content.
Recoatability
Loss of adhesion between base and top coat or of recoatability is unlikely at low addition rates. Such defects, the causes of which include over-baking, may be intensified, however.
Additive to improve slip and levelling properties. Eliminates craters and spray structures Very versatile.
Characterised by good to very good efficiency in baking paints based on alkyd resin, alkyd / amino resin combinations and in acrylic resin and acrylic / amino resin combinations. Water-soluble but, in view of the limited stability of such solutions in water-borne systems, extensive trials should always be conducted beforehand. Loss of adhesion between base and top coat or of recoatability is unlikely at low addition rates. Such defects, the causes of which include over-baking, may be intensified, however.
Recommended usage level: 0.05 - 0.5% based on solids content.