Nuodex Combination LS

Condea Servo

干燥剂 Drier / Siccative 醇酸树脂 Alkyd Resins 涂层 >> 水生 Coatings >> Waterborne NUODEX Driers and Catalysts NUODEX WEB driers General NUODEX WEB DRIERS NUODEX WEB driers are water emulsifiable. They contain special complexing and reactive emulsifiers which allows spontaneous emulsification in water and other aqueous solutions. They are used in oxidatively drying systems based on water emulsifiable or water soluble alkyd resins and also provide better compatibility in water-borne paints. These driers can be added during the let-down stage of the paint production. It is however, recommended to pre-mix the product with the resin, the thickening agent or to add it to an aqueous emulsion (approx. 10%). This reduces the risk of flocculation or coagulation. The following guidelines are meant to give a general indication (% drier based on resin solids). Either one of these drier suggestions is likely to give an optimal drying performance. NUODEX WEB Cobalt 8% : 0.8 - 1.5% NUODEX WEB Cobalt 8% : 0.5 - 1.3% & NUODEX WEB Zirconium 12% : 0.8 - 2.5% NUODEX WEB Cobalt 8% : 0.5 - 1.0% & NUODEX WEB Manganese 9% : 0.5 - 1.0% NUODEX Combination LS : 1.5% - 3.0% SERAD FS 530/FS 531 : 1.0 - 5.0% (on total paint) NUODEX WEB Cobalt 8% : 0.7 - 1.3% & NUODEX Cobalt 254 : 0.2 - 0.6% (on total paint) NUODEX WEB driers: WEB Cobalt 8% WEB Manganese 9% WEB Zirconium 12% NUODEX combination LS This Product is especially recommended for alkyd emulsion paints. The optimal drier concentration should however be determined experimentally Contains special complexing and reactive emulsifiers which allows spontaneous emulsification. Can be used in oxidatively drying systems based on water emulsifiable or water soluble alkyd resins and also provide better compatibility in water-borne paints. Can be added during the let-down stage of the paint production. Recommended to pre-mix the product with the resin, the thickening agent or to add it to an aqueous emulsion (approx. 10%). This reduces the risk of flocculation or coagulation. Recommended usage level: 1.5% - 3.0% based on resin solids.