Serdas 7005
Based on oil/wax components with a small addition of a special ester mixture
Condea Servo
消去泡沫/防沫剂 >> 无硅 >> 微晶石蜡
Defoamer / Antifoaming agent >> Silicone-free >> Microcristalline wax
消去泡沫/防沫剂 >> 无硅 >> 矿物油
Defoamer / Antifoaming agent >> Silicone-free >> Mineral oil
消去泡沫/防沫剂 >> 无硅 >> 聚合体
Defoamer / Antifoaming agent >> Silicone-free >> Polymeric
涂层 >> 水生
Coatings >> Waterborne
SERDAS Anti-foaming agents SERDAS 7005
Anti-foaming Agent, for universal application
GENERAL INFORMATION
SERDAS 7005 is a silicone free liquid defoamer, economical in use, for universal water based applications. The product shows very good long-term efficiency.
APPLICATION AND PROPERTIES
SERDAS 7005 is specially recommended for systems that are sensitive to surface defaults. SERDAS 7005 is based on oil/wax components with a small addition of a special ester mixture. The product is manufactured according to a unique production procedure, resulting in a very stable compound. SERDAS 7005 can be stored for many months without the risk of separation or sedimentation. FEATURE --> CONSEQUENCE Excellent stability --> best reproducibility Low emulsifiability in water --> Provides ongterm effectivity --> decreased water sensitivity and increased scrub resistance Economical in use --> cost saving Silicon-free --> minimum risk of surface defects and loss of adhesion --> works in a wide range of waterborne systems
DOSAGE
It is recommended to add at least approx. half of the quantity of SERDAS 7005 to the mill base formulation and the rest during the letdown stage. The exact concentration to be used depends on the individual conditions. In general a rate of 0.2 – 0.6% SERDAS 7005, calculated on the total quantity of the paint system, will give excellent results.
Silicone free liquid defoamer, for universal water based applications. Shows very good long-term efficiency. Recommended for systems that are sensitive to surface defaults. Stable compound. Excellent stability, best reproducibility. Low emulsifiability in water, decreases water sensitivity and increases scrub resistance. Silicon-free, provides minimum risk of surface defects and loss of adhesion.
Should be added at least approx. half to the mill base formulation and the rest during the letdown stage. Recommended usage level: 0.2 – 0.6%, calculated on the total quantity of the paint system.