Serdas 7010
Based on oil/wax components with a small addition of a special silicone
Condea Servo
消去泡沫/防沫剂 >> 硅树脂
Defoamer / Antifoaming agent >> Silicone
消去泡沫/防沫剂 >> 无硅 >> 微晶石蜡
Defoamer / Antifoaming agent >> Silicone-free >> Microcristalline wax
消去泡沫/防沫剂 >> 无硅 >> 矿物油
Defoamer / Antifoaming agent >> Silicone-free >> Mineral oil
涂层 >> 水生
Coatings >> Waterborne
SERDAS Anti-foaming agents SERDAS 7010
Anti-foaming Agent, for universal application
GENERAL INFORMATION
SERDAS 7010 is a liquid defoamer, economical in use, for universal water based applications. The product shows very good long-term efficiency
APPLICATION AND PROPERTIES
SERDAS 7010 is specially recommended for systems with good emulsifying properties, such as surfactant stabilised emulsions and emulsion paints. SERDAS 7010 is based on oil/wax components with a small addition of a special silicone. The product is manufactured according to a unique production procedure, resulting in a very stable compound. SERDAS 7010 can be stored for many months without the risk of separation of sedimentation. FEATURE -> CONSEQUENCE Excellent stability -> best reproducibility Low emulsifiability in water -> provides longterm effectivity -> decreased water sensitivity and increased scrub resistance Economical in use -> cost saving
DOSAGE
It is recommended to add at least approx. half of the quantity of SERDAS 7010 to the mill base formulation and the rest during the letdown stage. The exact concentration to be used depends on the individual conditions. In general a rate of 0.2 – 0.5% SERDAS 7010, calculated on the total quantity of the paint system, will give excellent results.
Liquid defoamer for universal water based applications. Shows very good long-term efficiency. Specially recommended for systems with good emulsifying properties, such as surfactant stabilised emulsions and emulsion paints. Stable compound. Low emulsifiability in water, decreases water sensitivity and increases scrub resistance.
Recommended usage level: 0.2 – 0.5%,calculated on the total quantity of the paint system. Should be added at least approx. half of the quantity to the mill base formulation and the rest during the letdown stage.