Dow Corning 11
Reactive silicone glycol surfactant with carbinol functionality
Dow Corning
抗磨损性
Abrasion Resistance
流动/均化剂 >> 硅树脂
Flow / Levelling agent >> Silicone
滑动控制 >> 硅树脂
Slip control >> Silicone
丙烯酸/丙烯酸盐树脂
Acrylic/Acrylate Resins
醇酸树脂
Alkyd Resins
氨基树脂
Amino Resins
纤维素树脂
Cellulosic Resins
环氧树脂
Epoxy Resins
聚酯
Polyester
聚亚安酯
Polyurethane
乙烯基
Vinyl
涂层 >> 由溶剂生成
Coatings >> Solventborne
木器 &家具涂层
Wood & Furniture Coatings
Toluene
Dow Corning® 11 Additive
FEATURES
Provides slip, mar resistance and
leveling in solvent-based
applications
COMPOSITION
Reactive silicone glycol
surfactant with carbinol
functionality
Supplied at 10 percent active
concentration
Silicone additive provides slip, mar resistance and leveling in
solvent-based applications
USES
Dow Corning® 11 Additive has been successful in these industrial applications:
Table I: Industrial Applications for Dow Corning 11 Additive1
To reduce the coefficient of friction:
Ink: Solvent-based flexographic ink at 0.1-0.2%
Coating: Solvent-based wood coating at 0.2-1.0% or as low as
less than 0.05%
Paint: Solvent-based paint at 0.05-0.2%
To improve mar resistance:
Ink: UV-cured flexographic ink at 0.5-1.0%
Coating: Solvent-based wood coating at 0.2-1.0% or as low as
less than 0.05%
Paint: Solvent-based paint at 0.05 - 0.2%
To improve leveling:
Coating: Solvent-based automotive refinishing coating at 0.5-
1.0% based on solids
Solvent-based wood coating at 0.1-5.0%
Paint: Solvent-based paint at 0.05-0.1% or as high as 1.0%
Dow Corning 11 Additive is effective
at low concentrations. The amount
required depends on type of formulation,
the solvent it contains,
resin system and total system solids.
Dow Corning 11 Additive is generally
effective at concentrations ranging
from 0.05-2.0 weight percent, based
upon total formulation. This additive
can be added during the grind
or let-down, or can be post-added.
Characteristics may vary when used
with different systems and formulations.
Dow Corning 11 Additive is
compatible with acrylic, alkyd,
amide, epoxy, nitrocellulose, polyesters,
polyurethane, and vinyl
systems. Thorough preproduction
testing is necessary to ensure
expected performance.
Silicone additive provides slip, mar resistance and leveling in solvent-based applications.
Effective at low concentrations. Can be added during the grind or let-down, or can be post-added. Recommended usage levels:
To reduce the coefficient of friction: in solvent-based wood coating add 0.2-1.0% or as low as less than 0.05%, in solvent-based paint add 0.05-0.2%.
To improve mar resistance: in solvent-based wood coating add 0.2-1.0% or as low as less than 0.05%, in solvent-based paint add 0.05 - 0.2%.
To improve leveling in solvent-based automotive refinishing coating add 0.5-1.0% based on solids, in solvent-based wood coating add 0.1-5.0%, in solvent-based paint add 0.05-0.1%.