Dow Corning 65
Water-based silicone
Dow Corning
抗磨损性
Abrasion Resistance
消去泡沫/防沫剂 >> 硅树脂
Defoamer / Antifoaming agent >> Silicone
流动/均化剂 >> 硅树脂
Flow / Levelling agent >> Silicone
滑动控制 >> 硅树脂
Slip control >> Silicone
润湿剂/边缘润湿促进剂 >> 硅树脂
Wetting agent/ Wet edge enhancer >> Silicone
丙烯酸/丙烯酸盐树脂
Acrylic/Acrylate Resins
醇酸树脂
Alkyd Resins
氨基树脂
Amino Resins
纤维素树脂
Cellulosic Resins
环氧树脂
Epoxy Resins
聚酯
Polyester
聚亚安酯
Polyurethane
乙烯基
Vinyl
涂层 >> 由溶剂生成
Coatings >> Solventborne
涂层 >> 水生
Coatings >> Waterborne
木器 &家具涂层
Wood & Furniture Coatings
Water
FEATURES
Provides defoaming in ink and
coating applications
Improves leveling, wetting, mar
resistance and slip
COMPOSITION
Milk-white, creamy emulsion
Water-based silicone antifoam
Dow Corning® 65 Additive
Water-based silicone defoamer for ink and coatings applications
USES
Dow Corning 65 Additive can be used to provide defoaming and improve
leveling, wetting, mar resistance and slip. See Table I for industrial applications
in which Dow Corning 65 Additive has been successfully used.
To provide defoaming:
Ink Water-based flexographic ink at 0.05-0.5%
Water-based gravure ink at 0.1-0.5%
Water-based screen printing ink at 0.05-0.1%
Solvent-based flexographic ink at 0.05-0.1%
Paint Water-based paint at 0.05-0.2% typical. Can be as
low as <0.05 or as high as 0.5-1.0%
To improve leveling and wetting:
Ink Water-based flexographic ink at 0.05-0.1%
Coating Water-based wood coating at 0.5-1.0%
Paint Water-based paint at 0.1-0.15%
To improve mar resistance and slip:
Paint Solvent-based paint at 0.05-0.1%
HOW TO USE
Dow Corning 65 Additive is effective
at low concentrations. The amount
required depends on type of formulation,
the solvent it contains, resin
system and total system solids.
Dow Corning 65 Additive is generally
effective at concentrations ranging
from 0.05 to 3.0 weight percent,
based upon total formulation. This
product can be added during the
grind, let down or be post-added.
Characteristics may vary when used
with different systems and formulations.
Dow Corning 65 Additive is
compatible with acrylic, alkyd,
amide, epoxy, nitrocellulose,
polyester, polyurethane and vinyl
systems. Thorough preproduction
testing is necessary to ensure
expected performance.
Water-based silicone defoamer that provide defoaming and improve leveling, wetting, mar resistance and slip for coatings applications. Can be added during the grind, let down or be post-added.
Recommended usage levels:
To provide defoaming in water-based paint add 0.05-0.2% typical or as low as <0.05 or as high as 0.5-1.0%.
To improve leveling and wetting: in water-based wood coating add 0.5-1.0%, in water-based paint add 0.1-0.15%.
To improve mar resistance and slip in solvent-based paint add 0.05-0.1%.