EFKA 3638

Polyisocyanates modified polysiloxane

Efka Additives

抗磨损性 Abrasion Resistance 抗阻滞剂 Antiblocking agent 流动/均化剂 >> 硅树脂 Flow / Levelling agent >> Silicone 滑动控制 >> 硅树脂 Slip control >> Silicone 聚亚安酯 Polyurethane 涂层 >> 由溶剂生成 Coatings >> Solventborne 涂层 >> 无溶剂/ 高固体 Coatings >> Solvent-Free/ High-Solids EFKA-3886 is a polysiloxane modified polyisocyanate designed to crosslink with hydroxyl or carboxyl groups. It is compatible with most polyisocyanates e.g. Desmodur® and similar products. The addition of EFKA-3886 in polyurethane lacquers or coatings gives the following advantages: improved levelling reduced tendency for orange-peel or cratering improved slip and surface smoothness, these improvements are more permanent, as the additives cross-link to form part of the final film reduced surface tension with little or no foam formation prevention of Bénard cells Application: EFKA-3886 is a cross-linking additive designed for all polyurethane systems, both two-component and moisture curing. It must be added to the polyisocyanate solution in two component systems. EFKA-3886, especially developed for use in wood finishes, helps to improve mar-resistance, orientation of the matting agent and the prevention of flooding in pigmented systems. When applying the polyurethane system by curtain coating on open pore wood surfaces, a defoamer such as EFKA-2022 should be added. Since EFKA-3886 actually takes part in the cross-linking action and forms an integral part of the finished polymer, the slip and scratch resistance properties are more permanent compared with normal additives. Addition: 2.0 - 3.0% calculated on the polyol component. EFKA-3886 should be added to the hardener component. The NCO-value of EFKA-3886 of approx. 12% (based on solids) should be taken into account in the isocyanate calculation. Polysiloxane modified polyisocyanate designed to crosslink with hydroxyl or carboxyl groups. It is compatible with most polyisocyanates. Improves levelling, reduces tendency for orange-peel or cratering. Improves slip and surface smoothness, these improvements are more permanent, as the additives cross-link to form part of the final film. Reduces surface tension with little or no foam formation. Prevention of Bénard cells. Suitable for all polyurethane systems, both two-component and moisture curing. It must be added to the polyisocyanate solution in two component systems.Especially developed for use in wood finishes. When applying the polyurethane system by curtain coating on open pore wood surfaces, a defoamer should be added. Recommended usage level: 2.0 - 3.0% calculated on the polyol component. Should be added to the hardener component. The NCO-value of approx. 12% (based on solids) should be taken into account in the isocyanate calculation.