ICM 1191
Silicone Emulsion
ICM
流动/均化剂 >> 硅树脂
Flow / Levelling agent >> Silicone
滑动控制 >> 硅树脂
Slip control >> Silicone
底材表面处理剂, 混杂 >> 光泽控制
Surface conditioner, miscellaneous >> Gloss control
润湿剂/边缘润湿促进剂 >> 硅树脂
Wetting agent/ Wet edge enhancer >> Silicone
涂层 >> 水生
Coatings >> Waterborne
Type...............................Silicone Emulsion
Physical form................Milky white liquid
Special Properties.........Small particle size increases stability and reduces surface defects.
Primary use...................Increases Gloss, Slip, and Wetting of water-based Inks and Coatings.
ICM 1191 Additive is a higher molecular-weight silicone emulsion that is easily diluted in
water. Its small particle size allows for excellent dilution stability and causes minimal foam.
It can be used in almost all water-based paint, ink, and coating applications where increased
gloss, slip, or flow-out is needed. ICM 1191 also aids in overall mar and abrasion resistance.
TYPICAL PROPERTIES: Appearance(@25°C)......White Creamy Liquid % Silicone Fluid.........................................40 pH (as is @25°C)..........................................7.7 Specific Gravity.......................................0.98 APPLICATIONS: Water-Borne Gloss Slip Wetting/Leveling Secondary Benefits
Mar, Rub, and Abrasion Resistance
HOW TO USE:
Typical concentrations of 0.005-0.1% by weight, based upon total solids.
Check recoatability of system and avoid or minimize contamination of processing equipment.
ICM 1191 should be added at the final thinning or color-matching step.
High molecular-weight, small particle size, increases stability and reduces surface defects as foam. Increases gloss, slip, wetting, levelling and flow-out. Also provides mar and abrasion resistance.
Recommended usage level: 0.005-0.1% by weight, based upon total solids. Check recoatability of system and avoid or minimize contamination of processing equipment. Should be added in the final thinning and color-matching step.