Fungitrol 400

Carbamic acid, butyl-3-iodo-2-propynyl ester 55406-53-6

International Specialty Products

防腐剂 >> 除海藻剂&杀真菌剂 Preservative >> Algicide & Fungicide 防腐剂 >> 生物灭杀剂,膜保护 >> 氨基甲酸盐和二硫代氨基甲酸盐 Preservative >> Biocide, Film protection >> Carbamates and dithiocarbamates 油墨 >> 水型 Inks >> Water-based 涂层 >> 由溶剂生成 Coatings >> Solventborne 涂层 >> 水生 Coatings >> Waterborne INKS INKS 木器 &家具涂层 >> 污迹 Wood & Furniture Coatings >> Stains 塑料涂层 Plastic coating 其它工业 >> 纸涂层 Other industry >> Paper coatings FUNGITROL® 400 fungicide offers broad protection against degradation, discoloration and defacement caused by mold, mildew and algae. Carbamic acid, butyl-3-iodo-2-propynyl ester FUNGITROL® 400 fungicide is used primarily as a dry-film mildew protector for paint, coatings, stains, etc. Other applications include adhesives, metalworking fluids and printing inks. It is easily incorporated into water-based or solvent-based formulations. It can be added efficiently at the appropriate formulation stage (i.e., prior to letdown). The product exhibits good stability with ionic surfactants and emulsifiers. Dry Film Paint Preservative FUNGITROL® 400 inhibits the growth of mildew in solvent-based paints and waterborne paints, stains and latex emulsions. For best results, it should be solubilized in a suitable solvent prior to adding to the paint. Addition should be at the end of the manufacturing process and allowed to mix long enough to be adequately dispersed. Typical levels for protection against mildew on painted surfaces are 0.1 - 0.5% by weight in wet paint. For example, house paint with a wet density of 10 lbs. per gallon would use 1 - 5 lbs. of this product per 100 gallons of wet paint. Where the climate is severe and mildew growth is a major problem for painted surfaces, more would be required, as much as 0.8% by weight in the paint. Plastics and Plastic Coatings FUNGITROL® 400 may be used to prevent surface mildew growth on plastic items such as shower curtains, cable and wire insulation, sun umbrellas, polymer furniture, filter medias, polymer components of carpet, etc. Intended plastics include polymers such as PVC, polyurethanes, elastomers and rubbers, neoprene, styrene compounds, polyolefins, etc. Use levels of 0.05 - 1.0% by weight of the plastic are generally adequate. This product should be dispersed in the plasticizer or color concentrate before it is incorporated into the resin to ensure a uniform distribution. Use of this product is not recommended if the heat of processing is above 350 °F for prolonged periods, nor should it be used in a plastic that will be in contact with food or medical device applications. For example, to inhibit growth of mildew on a plastic such as polyurethane boat seat cushions intended for a non-food area, add 0.5% (5 lbs. FUNGITROL® 400 per 1000 lbs. of polyurethane formulation) of this product to the polyurethane formulation. Paper Coatings FUNGITROL® 400 may be used as a mildewcide in both aqueous and solvent-based coatings, which are applied to paper and cardboard substrates. This product can be used to prevent mold and mildew from growing on products such as: corrugated cardboard or soap wrappers, wall covers, non-food contact packaging materials and non-food contact paper tapes. Use levels of this product range from 0.02 - 0.75% of this product by weight. This product should be added at the end of the production cycle and with good agitation to prevent possible mechanical losses and to ensure uniform distribution. For example, to inhibit growth of mildew on corrugated cardboard intended for a non-food packaging, add 0.5% (5 lbs. FUNGITROL® 400 per 1000 lbs. of coating material) of this product to the coating material formulation. Inks FUNGITROL® 400 may be used in aqueous-based ink solutions for protection of these solutions against attack of fungal organisms. It is recommended that this product be added at the end of the product cycle with good agitation. This product will generally impart protection when used at levels of 0.05 - 3.0% based on the formula weight. Carbamic acid, butyl-3-iodo-2-propynyl ester. Used as a fungicide and as a dry-film mildew protector for solvent-based paints and waterborne paints, stains and latex emulsions. Offers good protection against degradation, discoloration and defacement caused by mold, mildew and algae and good stability with ionic surfactants and emulsifiers. Can be used in plastic and paper coatings and in aqueous-based ink solutions.